Waterborne Acrylic and Urethane
Waterborne Acrylic and Urethane coatings are custom designed to meet customers specified performance requirements. These coatings are intended for the application over polycarbonate, polystyrene, acrylics and polypropylene, substrates. Also available are Direct-to-Metal (DTM) waterborne coatings. Our 1K waterborne systems provide excellent appearance, chemical resistance and allow for a reduction of VOC and odor. Waterborne Acrylic DTM coatings are an excellent option for applications requiring medium-light duty corrosion resistance and exterior durability.
AQUAPRIME
AQUAPRIME is a flexible waterborne primer-surfacer designed for use on plastic body substrates including bumpers, grills, spoilers, valances, and body panels. The high solids of AquaPrime provide excellent fill and build properties and is compatible with most basecoat/clearcoat products.
TECHNICAL DATA: Weight Per Gallon, lbs: 10.0 Reducer: Not required, ready to spray. V.O.C. , lbs/gal 0.80 Appearance: Low Gloss Black Solids, wt %: 44.0
SUBSTRATES:
AquaPrime will adhere to variety of unpainted surfaces including:
Sheet Molding Compound (SMC)
Bulk Molding Compound (BMC)
Poly Vinyl Chloride (PVC)
Polycarbonate (PC)
Ethylene Propylene Diene Modified (PP/EPDM)
Ethylene Propylene Modified (PP/EPM)
Acrylonitrile Butadiene Styrene (ABS)
Polyfenylene Oxide Polymer (PPO)
Polyurethane (PUR)
Polypropylene (PP) or Thermal Polyolefin (TPO) substrates will need to be coated with an adhesion promoter before the application of AquaPrime Primer-Surfacer
APPLICATION
Application: Mix AquaPrime Flexible Primer- Surfacer well before using. This material is ready to use as received but can be reduced with distilled water to obtain lower spray viscosity.
Surface to be coated should be thoroughly cleaned to remove any existing road film, dust, grease or any other dirt or surface contaminant. Dry surface before application.
Spray apply 1 - 3 medium wet coats of AquaPrime.
Flash dry for 5 minutes between coats
Air dry for 1 to 2 hours y Force dry for 40 minutes at 140o F 01/1
JET BLACK 2780500
JET BLACK 2780500 is a multi-purpose, air dry, waterborne protective and decorative coating for interior parts. This product is suitable for interior parts made of steel, aluminum, zinc-based die castings, ABS, ABS/polycarbonate blends, and polyphenylene oxide - polystyrene plastics, pulp preform molded board, primed phenolic, and nylon.
Typical Properties:
Weight per gallon - 8.60 - 9.0 lbs.
pH - 8.4 - 8.7
Gloss @ 60 degrees - 4.0 - 5.0
Viscosity, seconds
Total Solids - 30.0 - 32.0% by weight
Crypt - 7 - 14
APPLICATION
Jet Black 2780500 can be applied using conventional spray equipment to achieve a dry film build of .7 - 1.0 mils. This product can be air dried or baked at 1800 F to reduce dry time.
MEDIUM JET BLACK 2780502
MEDIUM JET BLACK 2780502 is a multi-purpose, waterborne protective and decorative coating which provides good adhesion to metal, wood and plastics.. This product is suitable for parts made of steel, aluminum, zinc-based die castings, ABS, ABS/polycarbonate blends, and polyphenylene oxide - polystyrene plastics, pulp molded board, primed phenolic, and nylon substrates.
Typical Properties:
Weight per gallon - 8.60 - 9.0 lbs.
pH - 8.4 - 8.7
Gloss @ 60 degrees - 30 - 50
Viscosity, seconds
Total Solids - 30.0 - 32.0% by weight
Performance Benefits
Offers good humidity and corrosion resistance
Excellent flexibility, abrasion and mar resistance.
Humidity Resistance ASTM D 4585 - Pass 120 hrs.
Salt Spray CRS 2- 3 Mils DFT - Pass 120 hrs.
APPLICATION
Jet Black 2780501 can be applied using conventional spray equipment to achieve a dry film build of 1.0 - 2.0 mils. This product can be air dried or baked at 1800 F to reduce dry time. Minimum film forming temperature is 90F.